Wheeler's Front & Rear SuperBump Bumpstop Set for 2003+ 4Runner/2007-2014 FJ Cruiser
READ TRAIL TACOMA'S PRODUCT REVIEW HERE
Wheeler's Front & Rear SuperBump Bumpstop Set for 2003+ 4Runner/2007-2014 FJ Cruiser
This complete set of custom molded front and rear bumpstops are made from our super durable micro-cellular polyurethane formula and provide a much more controlled, progressive and comfortable bottoming response from your front suspension compared to rubber or solid polyurethane. Zinc-coated mounting brackets allow easy replacement of your factory rear bumpstops with no drilling required. Mounts under the U-bolts in the same location as your factory bumpstops. Comes with hardware and an Allen wrench. Optional 1/4" and 3/8" spacers are available for bump stop height tuning.
Please note: The front lower control arms on these vehicles have two bumpstop locations (forward and rear). Our Superbump Bumpstops mount in the rear location of the control arms. The OEM bumpstop should remain in the front location to assist with harder hits or bottom-outs.
Note: Video shows installation on a Toyota Tacoma. The installation on the 4Runner/FJ Cruiser rear varies. Refer to the Installation Instructions for the correct installation procedure.
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Proprietary micro-cellular Polyurethane bumps
- Zinc-plated ASTM A36 steel brackets
- Mounting hardware provided
- Includes custom-length Allen wrench for mounting front bumps
- Optional HDPE spacers available for fine-tuning height (spacers sold separately)
TOYOTA 4RUNNER
(2003-2022)
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
2010 Toyota 4Runner
2011 Toyota 4Runner
2012 Toyota 4Runner
2013 Toyota 4Runner
2014 Toyota 4Runner
2015 Toyota 4Runner
2016 Toyota 4Runner
2017 Toyota 4Runner
2018 Toyota 4Runner
2019 Toyota 4Runner
2020 Toyota 4Runner
2021 Toyota 4Runner
2022 Toyota 4Runner
TOYOTA FJ CRUISER
(2007-2014)
2007 Toyota FJ Cruiser
2008 Toyota FJ Cruiser
2009 Toyota FJ Cruiser
2010 Toyota FJ Cruiser
2011 Toyota FJ Cruiser
2012 Toyota FJ Cruiser
2013 Toyota FJ Cruiser
2014 Toyota FJ Cruiser
|
INSTRUCTIONS FOR FRONT SUPERBUMPS Download installation instructions here. |
INSTRUCTIONS FOR REAR SUPERBUMPS Download installation instructions here. |
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts that are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.
-
![WHEELERS SUPERBUMP SPACERS]()
Wheeler's Superbump SpacersSale Price $14.17 Regular Price $16.68
